Friday, 17 December 2010

Photography Class: The Project.

The project assigned was to learn about photographic techniques. In this workshop we was introduced to the pinhole camera, one of the earliest and simpliest way of capturing images.

Example of images done by pinhole cameras from http://www.pinhole.org/

Tom McCutcheon

Scott Petty

Justin Quinell
Images taken from a pinhole camera are usually unique and difficult to reproduce directly again. Reasons being that the pinhole camera is a very raw device, the components controls and mechanism are control and made by hand and without a lens the focus of the image is difficult if not impossible to control. Many artists today still use a pinhole camera because of the uniqueness of the images you gain from them.

Making a Pinhole Camera:

We were asked to bring in a tin or box that can be sealed so light cannot go through cept through a pinhole. I chose a Cadbury's chocolate tin box.

The steps of making the camera follows:

  • Paint the inside of the tin black, including the lid so no light can reflect and interfere when taking a image. Give one layer of black paint, wait to dry and give another coating to make sure, re-apply more paint if do not feel it's covered enough
  • Create a small hole on the tin, acting as a lens' barrel.
  • Cut a flat piece of foil (make sure its flat with little creases) and apply ontop of the hold and seal it into place using gaffer tape.
  • Create a fine hole using a pin, smaller the better as it will affect exposure times.
  • Using cardboard cut a piece large enough to cover the pinhole and tape it on so it functions as a door.
And that's how I made my pinhole camera!

No comments:

Post a Comment